Technical & Electrical

The Supracontrol THS20 delivers precise temperature and humidity measurements for ICT and industrial environments. Designed for seamless RS-485 integration with Supracontrol controllers, it combines accuracy with industrial-grade reliability. This section provides the key technical specifications and electrical details.

ParameterValue
System
MCU32-bit ARM® Cortex® M0+ ultra-low-power microcontroller
FirmwareBare-metal architecture ‒ C-based firmware
Sensor specification
Sensor characteristicsFully calibrated, linearized, humidity and temperature compensated sensor
TemperatureMeasuring range: -20 to 100 °C (-4 to 212 °F) Typical accuracy: ±0.2 °C Resolution: 0.01 °C
HumidityMeasuring range: 0 to 100 %RH Accuracy: ±2 %RH Resolution: 1 %RH
Physical
Status LED1× bi-color LED for indicating device power and system status - Blinking Green: Sensor is initializing (few seconds after power-up) - Solid Green: Sensor is operational - Solid Red: One or more values are in an alarm state
BUS portConnector: 1× RJ45 Interfaces: RS-485 Protocols: SupraBUS (optional Modbus RTU) Features: Auto-discovery
Power
Input voltage12 VDC nominal (10.8–13.2 V), with reverse polarity and over-voltage protection
ConnectorRJ45 connector with integrated Power over Cable (PoC) for combined power and data
Consumption0.06 W
Enclosure
MaterialBlack ABS plastic, min. wall thickness 2.5 mm, fine-textured surface
Dimensions (W × H × D)62 × 28 × 62 mm (2.44 × 1.1 × 2.44 in)
Weight35 g (0.077 lbs)
Mounting optionsIntegrated DIN rail mounting bracket (TS35/7.5 and TS35/15)
Operating environment
Temperature-20 to 80 °C (-4 to 176 °F)
Humidity10 to 90 %RH non-condensing
ProtectionIP30
Storage conditions
Temperature-30 to 90 °C (-22 to 194 °F)
Humidity0 to 95 %RH non-condensing
Packaging
MaterialDouble-wall corrugated fiberboard (E/B flute), fully recyclable
Dimensions (W × H × D)146 × 66 × 146 mm (5.75 × 2.6 × 5.75 in)
Weight125 g (0.275 lbs)
Management
Centralized Management System (CMS)The sensor connects to Supracontrol controllers via RS-485 bus and is centrally managed and configured through the Supracontrol Enterprise application. All measurement data and sensor status are sent to the platform for unified monitoring, logging, and configuration. Real-time sensor data is also accessible via the Supracontrol Mobile app.